Copyright 2017 Big John Grills and Rotisseries
8
OPERATING INSTRUCTIONS
1. DO NOT ATTEMPT TO LIGHT THIS UNIT WITHOUT REMOVING THE WEATHER COVER. Gas
can accumulate and cause RAPID IGNITION.
2. Ensure all control valves are in the OFF position.
3. Check to make sure gas source is securely connected
4. Turn on gas source and allow system to pressurize - takes about 1 minute.
6.
TO LIGHT THE UNIT:
Hold a lit long handled butane lighter gun or fireplace match next to
outer ring on burner, push in the control knob, turn counter clockwise so it’s straight up and down
(this is HIGH). The burner will ignite instantly with a *POOF* sound. Remove lighter, then push and
turn 2nd control knob to HIGH - it will light instantly from the 1st. Repeat for center ring until whole
burner is lit.
7. Once burner is lit, adjust the control knobs to set desired temperature.
8.
TO TURN OFF UNIT:
Simply turn all of the control knobs to the OFF position and turn off gas
source. NEVER turn unit off by closing gas source first.
CENTER RING
2,000 - 10,000 BTU Output
MIDDLE RING
Up To 20,000 BTU Output
OUTER RING
Up To 30,000 BTU Output
