Basic instructions
Page 7
AirMaster EM50
Edition: 03/2015 M 2341 GB
1.11 Pollution abatement regulations
All works on and with the installation have to be carried out in compliance with the legal
requirements concerning waste prevention and proper recycling / disposal of waste.
Special care has to be taken when carrying out installation, repair and maintenance
works, as water pollutants like lubricating grease and oils, as well as solvent-containing
cleaning solutions are not to pollute the soil or get into the canalisation! These materials
have to be kept, transported, collected and disposed of in appropriate containers!
1.12 Waste disposal
After finishing the assembly or repair of this installation, dispose of the packing material
and remains which do not need to be further used according to the legal provisions for
recycling. The same applies to the component parts after putting the installation out of
service.
1.13 Notes for use
We reserve the right to modify the construction and technical data for reasons of further
development.
Therefore, no claims can be derived from the information, pictures, drawings and
descriptions. Errors and omissions excepted.
Inform yourself about mounting, adjusting, operating and maintaining before taking the
system into operation.
Apart from the safety-relevant instructions in this manual and the safety precautions
valid in the country of use, also observe the generally acknowledged technical
regulations (safe and appropriate working according to UVV, VBG, VDE etc.).
