background image

18

19

  Optional Accessories

Your new remote has a “Find Feature” build 
in. If you purchase either of the accessories 
below you can press a button to locate your 
remote if you misplace it. When your press the 
button the remote emits a loud tone to let you 
know where it is.

The optional keyfob can be kept 
on your key chain with your keys 
and lets you easily locate your 
lost remote with the push of a 
button. Two coin cell batteries are 
included. To replace them, pry 
the Keyfob open and replace with 
two CR2016 Lithium coin cells.

The optional stand is a handy place to store 
your remote, and if you misplace the remote 
the button on the stand lets you easily locate it.

The stand requires two AAA batteries, not 
included.

  Troubleshooting

Remote does not operate your product.

•   Press the mode button of the product you want 

to control.

•   Program the remote with a new code.
•   Install new batteries. (You might have to 

reprogram your remote after installing new 
batteries.)

•   Remote may not be compatible with your 

product.

Remote does not operate some features of your 
product.

•   Program remote with a new code.
•   Remote may not be able to operate all features 

of your product or button names might be 
different than your product.

Green Indicator blinks after you program a 
product code.

•   Remote did not accept the code.
•   Try to program the code again or try a different 

code.

For help with setup, please call: 201-661-9944.

The manufacturer warrants that this product shall 
be free from defects in material, workmanship 
and assembly, under normal use, in accordance 
with the speci

fi

 cations and warnings, for 120 days 

from the date of purchase. This warranty extends 
only to the original purchaser of the product, 
and is nontransferable. Defective products, 
together with the dated proof of purchase, must 
be returned to the place of purchase for repair or 
replacement. THERE ARE NO OTHER EXPRESS 
WARRANTIES. Incidental and consequential 
damages are disclaimed where permitted by law. 
This warranty gives you speci

fi

 c legal rights, and 

you may also have other rights which vary from 
state to state.

  Limited Warranty

Summary of Contents for BB40












Reviews: