17
+
Sensor Learning Mode
A.
Set tire pressure measuring: Four types of pressure measuring units are available; PSI, KPA, BAR
and kg/cm
2
. Users can make their own choices by pressing the thermometer button and the
star button .
B.
Set tire temperature measuring: Adjust setting by pressing the thermometer button and star button
for adjusting up or down. Celsius and Fahrenheit are provided.
C.
Setting low tire pressure: Adjust setting by pressing the thermometer button and star button for
adjusting up or down. The default value is 26 PSI.
D.
Setting high tire pressure: Adjust setting by pressing the thermometer button and star button for
adjusting up or down. The default value is 45 PSI.
E.
Setting tire upper temperature warning value: Adjust setting by pressing the thermometer button
and star button for adjusting up or down.
In the unlikelihood the sensor is broken or missing, the sensor learning mode provides a low cost
alternative to replace damaged or lost sensors. These ‘learnable sensors’ are available separately. The
LCD Receiver/Monitor can reload new sensors and the system will integrate this sensor information
into its system and will overwrite the replaced sensors information. Pressing the power switch and the
SET button at the same time for 3 seconds will activate the systems ‘learning mode,’ and TireGard™
will start to recognize new sensors.
Enter learning mode, insert battery into ‘learnable sensor’ immediately the LCD monitor will beep
once and finish learning process.
Summary of Contents for TireGard
Page 1: ......
