#12 x 2"
Pan Screw
SL Brace
Wood Screw
#8 x 2-1/2"
2" x 2" x 14"
Ground Stake
Using 2 Wood Screws (#8 x 2-1/2") per
Ground Stake, attach Ground Stake (2 x 2
x 14") to each post as illustrated below.
The SW Post hole will be dug out 6" wi
de x 6" long x 2" deep into the ground.
•Use a scrap wood piece in between the top of the
Ground Stake and the Sledge Hammer to protect the
stake from damage.
•Stakes are to be secure to the posts and the ground.
•Firmly anchor unit to ground before use.
•Check for looseness, re-secure and replace if necessary.
•DO NOT USE CONCRETE OR OTHER
MATERIALS FOR ANCHORING STAKES!
Using 2 Pan Screws (#12 x 2"), attach Slide making sure t
hat screws go through the Floor Board and into the SL Brace .
Note:
WARNING! DIGGING CAN BE DANGEROUS. CHECK FIRST FOR UNDERGROUND WIRING, CABLES, OR GAS LINES ETC.
1 Slide
HARDWARE LIST
2 p
cs #12 x 2" Pan
Screw
8
pc
s
#
8
x
2
½
" Wood
Screw
WOOD PARTS LIST
4 pcs 2x2x14" Ground
Stake
ACCESSORY LIST
Step 15
Attach Ground Stakes and Slide
#8 x 2-1/2"
Wood Screw
Location #1
Ground Stake Location #2
Ground Stake
!
t.
attaching to pos
Dig 2" Deep
SW Post Hole
Location #3
Ground Stake
Location #4
SW Post
Ground Stake
Ground Stakes
must be driven
a minimum of 10½"
into ground before
Summary of Contents for F24068
Page 10: ......
Page 27: ...NOTES...
