36
Fig. 18.3
Inside Fort View
Swing Wall Side
1895
1903
2-3/4”
Step 18: Floor Frame Assembly
A:
Remove the bottom bolt in (1938) Wall Mount. Do not discard this bolt you will re-install it after the (1903)
Floor Joist is attached. (fig. 18.2)
B:
From inside of the assembly, measure 2-3/4” down from the top of (1895) Floor End (fig. 18.3) and 2-3/8”
down from (1934) End Floor (fig. 18.4) then attach (1903) Floor Joist to each board with 2 (S4) #8 x 3” Wood
Screws per end. (fig. 18.2 and 18.4)
C:
Reinstall the bottom bolt in (1938) Wall Mount and tighten both bolts. (fig. 18.1)
Wood Parts
Hardware
Fig. 18.1
Fig. 18.2
1903
S4
1895
1938
Swing Wall Side
Remove this bolt then re-tighten
after adding screws
4 x
#8 x 3” Wood Screw
1 x
Floor Joist 5/4 x 3 x 38-1/2”
1903
S4
Fig. 18.4
1934
Inside Fort View
S4
1903
Window Wall Side
2-3/8”
Summary of Contents for F23242
