2A. STATIC TUBE (POWERFOIL X3.0)
Retainer Clip*
*Retainer clip is pre-installed to static tube. Remove clip from
static tube before installing tube into fan, and then reinstall clip
at top of tube.
Retainer Clip*
2B. STATIC TUBE (POWERFOIL D)
Kit 009894-01-011
or 009867-011
Kit 009894-02-011
*Retainer clip is pre-installed to static
tube. Remove clip from static tube
before installing tube into fan, and
then reinstall clip at top of tube.
Motor Frame Weld Nut
7/8"
(22 mm)
7/8"
(22 mm)
FANS THAT ALREADY HAVE A STATIC TUBE
If your fan already has a
fi eld-installed (removable)
static tube,
uninstall the static tube, bracket, and clamp. Replace with the
static tube marked “
PFX-R
” provided in kit
009867-011
. See
the instructions included in the kit for installation details.
If your fan already has a
factory-installed (non-removable)
static tube,
skip to step 3
.
FANS WITHOUT A MOTOR FRAME WELD NUT
If your motor frame does
NOT
have a weld nut, see the
instructions and use the static
tube marked “
PFX-R
” provided
in kit
009867-011
.
Replace with
kit 009867-011
Motor Frame Weld Nut
35 ft·lb (47.4 N·m)
35 ft·lb (47.4 N·m)