BIG ASS FANS HAIKU H Series, Installation Manual

Page: 9 / 16

HAIKU® BY BIG ASS FANS
5
6
Install Wiring Cover and Trim
Raise the wiring cover, allowing about a 1/8" (3 mm) gap at the
ceiling. Align the mounting slots with the screw holes on the
extension tube, and secure it with the wiring cover screws.
Slide the trim up the extension tube, aligning the tabs on the
inside with the slots on the bottom of the wiring cover. Twist
clockwise to snap the trim into position (
Fig. 6 ).
Fig. 6
Wiring Cover
Wiring Cover Trim
Screw
Screw
7
Install Airfoils
Indoor Fans: Remove and recycle the plastic protective cover.
Moving clockwise, align each airfoil on the fan hub and secure
it with the airfoil hardware (
Fig. 7 ). Make sure the sticker color
on each airfoil matches the corresponding sticker color on
the fan hub!
Fig. 7
Grommet
M5 Screw
Airfoil