BIG ASS FANS HAIKU H Series, Installation Manual

Page: 7 / 16

HAIKU® BY BIG ASS FANS
3
3
Hang Fan
Raise the extension tube to the mount, and insert the extension
tube brackets between the mount brackets and the rubber
bushing so that the mounting holes are aligned. Secure the
extension tube with the mounting hardware (
Fig. 3 ).
Fully tighten all hardware until the brackets slightly
compress the rubber bushing.
Secure Safety Cable
While supporting the fan, loop the safety cable around the
building structure or anchor hook, and then secure it with the
shackle (
Fig. 4
).
4
Shackle
Safety Cable
Fig. 4
Fig. 3
Flat Washer
M8 Bolt
Brackets
Extension Tube
Lock Washer
M8 Nut
Split Pin
Wiring Cover
Wiring Cover Trim
If required by local safety codes, the safety cable
must be secured directly to an existing part of
the building structure. It may be necessary to
install additional structural material to provide
attachment points.
Shackle
Safety
Cable