- 9 -
Warning:
Risk of injury! Due to the
sharp cutting blades and the glass
mixing unit proceed with great care.
Remove the measuring cap from the
lid opening and place the mixing unit
on the lid, so that the underside is
facing upwards.
Insert the tenons
of the measuring
cap in the slots of the locking ring
on the underside of the mixing unit.
Turn the measuring cap counter-
clockwise, so that the locking ring
can be removed.
Remove the locking ring
.
With great care remove the cutters
and the sealing washer
.
Danger of Injuries:
Clean the cutters very
carefully. They are very sharp.
After Cleaning
Replace the sealing washer
, the
cutters and the locking ring
into
their positions.
Insert the tenons
on the measuring
cap into the slots of the locking ring
on the underside of the mixing
unit.
Turn the measuring cap clockwise, so
that the locking ring
once again
sits firmly on the mixing unit.
The mixing unit can now be upturned
and the measuring cap placed onto
the lid.
Disposal
Do not dispose of the device in
normal domestic waste.
Dispose of the device over a registered
waste disposal firm or through your
communal waste disposal facility.
Observe the currently valid regulations.
In case of doubt, consult your waste
disposal facility.
Dispose of the packaging materi-
als in an environmentally respon-
sible manner.
Warranty and Service
The warranty conditions and service cen-
tre address can be found in the enclosed
warranty slip.
Importer
KOMPERNASS GMBH
BURGSTRASSE 21
D-44867 BOCHUM
www.kompernass.com
Subject to technical changes.
KH 526
KH526_IB_UK 02.02.2007 15:49 Uhr Seite 9
