Page 21
v2.1
Section 4. CONTROL & OPERATION
SUMMARY OF STANDARD CONTROLS AND OTHER CONTROL
OPTIONS
1.
Manual / Stand Alone Type
Standard External Controls Hardware (Supplied by Biddle)
1a.
Remote Wall Mounted Controller Ref: TB/TS/K-BIDDLE
Manual On/Off Control
Manual Room Temperature Control
Additional Control Functions
1b.
Remote On/Off Control Via. Volt Free Contacts
ie. Timer, BMS or PIR
1c.
Extract Control Via. Additional Relay Circuit
1d.
Master / Slave group control via.BACnet Terminal Connection
2.
Manual Heat / Automatic Ventilation
Standard External Controls Hardware (Supplied by Biddle)
2a.
Remote Wall Mounted Controller Ref: TB/TS/K-BIDDLE
Manual Room Temperature Control Only
2b
Remote Wall Mounted CO
2
Sensor (Supplied by Biddle to order)
Automatic control of ventilation levels based on CO
2
concentration.
IMPORTANT: With this arrangement there is no provision for Manual On/Off
Control. This must be done via. a remote device ie. Timer or BMS enabling
signal.
Additional Control Options Available
2c.
Extract Control Via. Additional Relay Circuit (Not Standard Supply)
2d.
Master / Slave group control via. BACnet Terminal Connection
(Supplied as standard)
3.
Automatic BMS Control.
Standard External Controls Hardware (Supplied by Biddle)
3a.
Remote Wall Mounted Controller Ref: TB/TS/K-BIDDLE
Manual Room Temperature Control Only
Additional Control Options Available
3b.
Automatic control of ventilation levels based on CO
2
concentration Via CO
2
sensor (Supplied and fitted by others, wired
through the BMS).
3c
PIR Occupancy sensor for On/Off Control (Supplied and fitted by
others, wired through the BMS).
3d.
Master / Slave group control Via. Direct Connection to BMS
Summary of Contents for Innovair School
Page 16: ...Page 16 v2 1 Section 3 ELECTRICAL CONNECTIONS continued...
Page 22: ...Page 22 v2 1...
Page 24: ...Page 24 v2 1...