I
NSTALLATION
C
ASSETTE
HEATER
en-14
en
2.4.2 Suspending and securing the unit
1. Mount Flamco rails
1
and fit threaded rods M8
1
accord
-
ing to the dimensions in the table
Caution:
c
Make sure the threaded rods are perpendicular.
2. Mount the suspension profiles
3
to the threaded rods.
3. Hook the unit into the suspension profiles.
4. You can still change the position of the unit somewhat by
moving it in the suspension profiles and Flamco rails.
5. Secure the suspension on both sides using the securing
brackets
4
.
Warning:
w
The unit may come down if you do not secure
the suspension.
6. Bring the underside of the unit in line with the T-beams of
the ceiling..
Caution:
c
Ensure that the unit is level.
2.5
Units with thermostatic control
1. Connect the unit to the CH system – the flow and return
paths are indicated by labels on the product.
2. Fill and bleed the system.
3. Check any compression joints for signs of weeping and
tighten where appropriate.
Dimensions for suspending the unit
R
EFERENCE
D
IMENSION
a
as needed
b
670 - 750 mm
c
CC 60
600 mm
