I
NSTALLATION
C
ASSETTE
HEATER
en-12
en
7. Complete the installation of the unit.
8. Switch the mains supply on and check that the unit is
working properly.
General instructions
Some parts of this section only apply to certain models.
Where this is the case, it will be indicated. If no specific model
is referred to, then the description applies to all models.
Note:
n
Make sure that you perform all installation
operations that are applicable to your unit.
Check the type plate and consult the manual if in
doubt about the model or type of your unit.
Note:
n
During the installation period, protect the unit
against damage and penetration of dust, cement, etc.
You can, for instance, use the packaging for
protection.
2.4
Hanging the unit up
2.4.1 Positioning the unit
Warning:
w
Make sure that the structure from which the
unit is about to be suspended can hold the
weight of the unit. The weight is specified on
the type plate.
Warning:
w
The
minimum
mounting height is 2.0 m.
