January 2013
Page 6 of 15
Fitting of the Grille
The grille consists of a profile face with two fixed
hinge mount brackets.
Before lifting the recessed grille into position,
locate the two hinge mount brackets fitted on the
grille frame. With both mount brackets facing
upwards towards the cassette heater, raise grille
to the two spring loaded hinges.
Push one spring loaded hinge, as indicated on
the insert, and locate hinge pin into the
appropriate mount bracket. Repeat with other
spring loaded hinge and affix grille to cassette
heater.
Once the above is complete the recessed hinged
grille can positioned into place.
Fasten the recessed grille by twisting and locking
the two tabs.
For access and servicing the recessed grille is
opened by pulling these two tabs outwards.
Note: with the two tabs released the recessed
grille frame will hinge downwards. With the grille
hinged open caution should be taken.
