I
NSTALLATION
C
OMFORT
A
IR
C
URTAIN
24
Connect the unit
Warning:
w
Make sure that the power supply you are working
on is switched off.
1
1
1
1
1. Fit the isolation switch and connect it to the power supply.
2. Remove the inspection panel:
-
Remove the screws
1
.
-
Pull the panel a little forward and take it away.
Caution:
c
The whole panel will come loose when you pull it forward:
Take care it does not fall down.
2
3. Fix the cable gland
2
to the unit.
4. Lead the power supply cable through the cable swivel.
5. Connect the cable to the terminal
3
in the unit according
to the wiring diagram.
3
Note:
n
The design in your unit may differ from the illustration.
