NOTE: As OfficeBOX™ M1000 will come with PCI card(s) already installed for you and back
plate of an enclosure will be specifically designed to fit your selection of hardware, your
OfficeBOX™ M1000 back side view of might look somewhat different from the one shown in
picture.
Installation
When it comes to installation of OfficeBOX™ M1000 we did all we could to simplify this process
for end users and make M1000 as much “Plug ‘n’ Play as possible so all you have to do is to
connect it to the network with CAT5 ethernet cable(s), connect your PCI cards to telephony
network and then connect the box to power outlet with attached adapter,
NOTE: As M1000 does not have Power button, you should first connect all the necessary cables
(network/telephony/console) before you plug it in a power outlet (110-240 V; 50-60Hz) using
attached adapter.
