Instructions for use
6
The appliance operation light 10 will flash every 4
seconds.
8
10
Fig. 2.11
8
10
Fig. 2.12
When you do not expect to use the boiler for a long
period:
1 Switch off the electricity supply to the boiler, by
means of the fused spur isolation switch;
2 Shut off the gas supply cock 13 and the valves
for the water circuits fitted under the boiler
(Fig. 2.13).
3 Empty the water circuits, if necessary, as
shown in the
installation instructions
in the sec-
tion
maintenance
.
Closed position
13
Fig. 2.13
2.7
Built in time switch (combi)
The combi boilers are equipped with a built in elec-
tronic time switch (5, Fig. 1.3 on page 1) which
controls the c.h. operation.
J
A
B
C
D
E
F
G
I
H
Fig. 2.14
Display and control panel
A Mode selector switch
B Reset button
C Enter button
D Increase “+” setting button
E Decrease “---” setting button
F On---off button
G Day selection buttons
H Day display
I Time display
J ON---OFF display
Setting the current time and weekday
Note: with a new unit or when the reset button B
has been pressed, the first day indicator H on the
left and the time display I are flashing.
Set the mode selector switch A to the
position
and press the buttons D or E until the current time
appears in the display I.
Press the day selection button corresponding to
the current day, considering that button
1=Monday, button 2=Tuesday and so on.
The clock starts by moving the switch A to the
AUTO position.
US
E
