page 5
Vidi 100/150 Install Guide
Remote Control Keys
Power/Standby:
Toggles normal or standby operation
Camera selection:
1 is default, but the remote can be used to control up to 4
cameras.
Number keys:
0-9 can be used to set or recall a preset
F keys:
IR remote control key. (ie [*]+[#]+[F1]: Address 1) (F1 is the default)
Note:
Will also toggle a zoom lock function - Press once returns to the home
screen and disables zoom functions. Pressing again enables the zoom functions.
Pressing the F1 key with the Vidi 150 toggles both the Zoom and Autoframing
functions Off (home) and then back On.
Preset:
Sets presets. Press Preset followed by a number key will save the settings to
that number.
Reset:
Clears presets. Press Reset followed by a number key will clear the settings
assigned to that number.
Home:
Confirms menu selection, enters the sub menu, or return the lens to the
middle (straight on) position after zoom press.
Arrow keys:
Navigate through the menu.
After zoom key press:
pressing the arrow keys will move the lens in that direction.
Pressing Home returns the lens to the middle position.
Return:
Goes back one level on the menu.
Menu:
Enters or exits the Menu
Zoom Slow:
Pressing the + or – key zooms the camera slowly
Zoom Fast:
Pressing the + or – key zooms the camera quickly
L/R Set:
Sets direction of the Pan/Tilt
Simultaneously pressing the L/R Set +1 will set the pan/tilt turning direction
Simultaneously pressing the L/R Set +2 will set the direction to go the opposite way
Backlight:
Toggles backlight compensation
P/T RST:
Resets pan/tilt to factory default.
Focus:
Not enabled.