page 2
Vidi 100/150 Install Guide
Installation
1. Mount the camera by placing on a stable flat surface or by opening the
stand and clamping the camera on the display/monitor.
Note:
The camera can also be mounted to a third party mount utilizing a 1/4"-20
UNC thread. Just unscrew the camera from the attached mount and reinstall on
the new mount.
2. Plug the USB cable into the camera and computer.
Note:
A USB 3.0 port must be used. USB 2.0 ports do not meet the bandwidth
and power requirements for the camera. The camera may be plugged into an
extender as long as it uses USB 3.0 standard and supports isochronous data
transfer.
Safety
Electric Safety - Installation and operation must
comply with applicable local electrical safety
standard.
Caution - Avoid stress, vibration or liquid exposure
in transport, storage and installation.
Installation - Mount the camera on a stable smooth
surface (shelf, wall display). The product enclosure
is made from organic material and any contact with
corrosive material should be avoided.
USB Cable
(supplied)