background image

 

IMPORTANT SAFETY INFORMATION 

 

Read these instructions. 
 
Keep these instructions. 
 
Heed all warnings. 
 
Follow all instructions. 
 
Do not use this apparatus near water. 
 
Clean only with a dry cloth. 
 
Do not block any of the ventilation openings. 
 
Install in accordance with the manufacturers 
instructions. 
 
WARNING - To reduce the risk of electric shock, 
do not expose this apparatus to rain or moisture. 
 
The apparatus shall not be exposed to dripping or 
splashing and no objects, such as vases, shall be 
placed on the apparatus. 
 
Unplug this apparatus during lightning storms or 
when unused for long periods of time. 

 

Do not install near any heat sources such as 
radiators, heat registers, stoves, or other apparatus 
(including amplifiers) that produce heat. 
 
Do not defeat the safety purpose of the polarized or 
grounding-type plug.  A polarized plug has two 
blades with one wider than the other.  A grounding 
type plug has two blades and a third grounding 
prong.  The wide blade or the third prong are 
provided for your safety.  When the provided plug 
does not fit into your outlet, consult an electrician for 
replacement of the obsolete outlet. 
 
Protect the power cord from being walked on or 
pinched particularly at plugs, convenience 
receptacles, and the point where they exit from the 
apparatus. 
 
Refer all servicing to qualified service personnel.  
Servicing is required when the apparatus has been 
damaged in any way, such as power-supply cord or 
plug is damaged, liquid has been spilled or objects 
have fallen into the apparatus, the apparatus has 
been exposed to rain or moisture, does not operate 
normally, or has been dropped. 

 

Summary of Contents for MCA 8050



















Reviews: