Page 2 IV6-LAU Instructions I SERIES
IMPORTANT SAFETY INSTRUCTIONS
Always follow these basic safety precautions when using or installing I SERIES
loudspeakers and accessories:
• Read these instructions prior to assembly, and keep for reference.
• Heed all warnings.
• Follow all instructions, particularly those pertaining to rigging, mounting, hanging and electrical connections.
• Do not use this apparatus near water (indoor models only).
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instruction.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
•
Only use attachments and accessories that are specified and approved by the manufacturer.
Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, does not operate normally, or has been
dropped.
The terms caution, warning, and danger may be used in this manual to alert the reader
to important safety considerations. If you have any questions or do not understand the
meaning of these terms, do not proceed with installation. Contact your local dealer,
distributor, or call Biamp directly for assistance. These terms are defined as:
CAUTION
: describes an operating condition or user action that may expose
the equipment or user to potential damage or danger.
WARNING
: describes an operating condition or user action that will likely
cause damage to the equipment or injury to the user or to others in the vicinity.
DANGER
: describes an operating condition or user action that will immediately
damage the equipment and/or be extremely dangerous or life threatening to
the user or to others in the vicinity.
CAUTION:
Installation of I SERIES loudspeakers should only be performed
by trained and qualified personnel. It is strongly recommended that a licensed
and certified professional structural engineer approve the mounting. Severe
injury and/or loss of life may occur if this product is improperly installed.
UNPACKING / INSPECTION
Community I SERIES rigging accessories
are engineered and manufactured
to be rugged and they are carefully
packed in sturdy cartons. However, it is
recommended to thoroughly inspect each
unit after it has been removed from the
packaging, as damage could occur during
shipping.
Please note that once the shipment has
left your dealer or the Biamp factory, the
responsibility for damage is always borne
by the freight company. If damage has
occurred during shipping, you must file a
claim directly with the freight company.
It’s very important to contact the freight
company as soon as possible after
receiving your shipment, as most freight
companies have a short time limit within
which they will investigate claims. Make
sure to save the carton and the packing
material, as most claims will be denied
if these materials are not retained. Your
Biamp dealer and the factory will try to
help in any way they can, but it is the
responsibility of the party receiving the
shipment to file the damage claim.
It is always a good idea to retain the carton
and packing materials, if possible, in the
event that the unit may need to be returned
to your dealer or distributor for repair in the
future.
WARNING:
I SERIES rigging
fittings are rated at Working Load
Limits (WLL) with a 10:1 safety
margin. All mounting provisions on the IV6
cabinets meet or exceed the 10:1 safety
margin to support the cabinet when used
with the specified mounting brackets,
either from Biamp or designated 3rd party
vendors.
Disregarding and/or exceeding the safe
working load limits could result in injury or
death!
RIGGING and ELECTRICAL SAFETY
IMPORTANT
: IV6 loudspeakers are designed and intended to be mounted to
differing indoor building surfaces using a variety of rigging hardware, means
and methods. Installation of loudspeakers should only be performed by trained
and qualified personnel. It is strongly recommended that a licensed and certified
professional structural engineer approve the mounting plan. Severe injury and/or loss of
life, and property damage may occur if these products are improperly installed.
DANGER
: All rigging fittings must be fully tightened and secured. Any missing
fasteners will compromise the structural integrity of the enclosure and
constitute a safety hazard. Do not suspend any loudspeakers unless all
fasteners are securely in place!
.
DANGER
: It is possible to experience severe electrical shock from a power
amplifier. Always make sure that all power amplifiers are in the “OFF” position
and unplugged from an AC Mains supply before performing electrical work.
TOOLS NEEDED FOR
ASSEMBLY:
• Metric socket and ratchet set
• Metric wrench set
