32. The system EQ curve will be displayed on the
"Advanced group" graphically.
33. We may configure the input signal source by
selecting the "Config" button and the "Input" button on a
per amplifier channel basis.
34. To configure the input matrix of racked amplifiers,
select "Config" and "Matrix" at the bottom of the screen
and select the input routing. Select the same input for all
3 cabinet sections.
35. Adjust your input matrix as appropriate for your
application. Double clicking on an input it will turn it up to
"0 dB". You may manually adjust the matrix level also.
36. A wide range of diagnostic functions may be shown
by selecting the "Show" tab at the bottom of the screen.
37. A more condensed overview of amplifier functions
and monitoring may be found by selecting "System List
at the top of the screen.
Further reading
•
LVH-900 series installation manual
Copyright 2013-2020 Biamp Systems
http://support.biamp.com/
7