6. "Add" (2) ALC404D's from the "Amplifier" tab at the
top of the screen.
7. Your screen should look like this. If you make a
mistake you may highlight an object and use the "Trash
can" icon in the lower right corner of the screen to delete
an item.
8. To switch the ALC1604D amplifier to Bridge mode,
activate the "Link" button at the bottom of the screen.
9. Use "CTRL-Left Click" and highlight channel 1+2, 3+4
and the same on the 2nd 1604D.
10. The "Bridge" indicator highlights at the top of the
screen, click it to bridge the channels.
11. When bridged, a single white dash appears on the
face of those (4) channels
Copyright 2013-2020 Biamp Systems
http://support.biamp.com/
3
