English
7
31
7.5
Turning on/off the machine
The machine can be turned on/off by pressing the button
located to the rear of the machine.
7.6
First Use - Use after a Long
Period of Inactivity
Refill the machine. Fill the water tank (see section "Filling
the Water Tank"). Connect the plug of the appliance to
the mains (see section "Connection to the Electric
Network").
For a perfect Espresso: rinse the coffee circuit if using the
machine for the first time or after a long period of
inactivity.
Upon the first start up brew at least 0.5 litres of water
with no capsules. Open and close the capsule loading tray
and press the “Long Coffee” button - with no capsule
inserted - to start brewing. Repeat the procedure until the
specified quantity is reached.
Do not leave water inside the tank for more than 3 days.
Do not leave water in the circuit for more than 3 days or,
in case this happens, dispense water (with no capsules)
before brewing coffee.
These simple operations will allow you to always brew
excellent coffee.
They have to be performed:
• at first start-up;
• when the machine remains inactive for a long time (more
than 2 weeks).
7.6.1
At First Start-up
Press the power button on the back of the machine to
turn it on. The control panel display shows the wording
"SYSTEM BOOT". Then you are requested to press a
button.
Once you have pressed a button the control panel display
shows the wording "Start water circuit priming?". The
"Espresso" button is steady on.
Press the espresso button and the machine starts priming
the circuit. The following screen is displayed:
It will then carry out the warm-up and rinse cycle as
described in section "Warm-up and Rinsing".
