17
4.6 Tone Generator
The
may also be used as a tone generator to trace and identify
cables and wires. The user will need a conventional inductive tone probe
within the range 810 Hz to 1110Hz.
To select tone generator (Level 2)
From level 2 main menu using or to move to icon press select.
The tester is now in tone generator mode. Upon completion of testing
press to return to menu.
TX Ranger
When tone has been selected, connect test lead to cable pair to be traced
and using tone probe which will emit a tone, the volume will increase the
nearer the probe is to the cable / being traced.
Note:-
The auto off function is disabled in tone generator mode so that the
tone can be injected into a cable for extended periods while tracing takes
place.
4.7 Typical Fault Displays
The following diagrams show typical fault traces to assist you in the
identification of faults using the TX Ranger:
OPEN
CONDUCTOR
SHORTED
CONDUCTOR
SPLICE
BRIDGE TAP
SPLIT/
RESPLIT
WET SPLICE/
WATER
FRAYED
CABLE
WATER
INGRESS
TAP
SPLITTER
Summary of Contents for TX RANGER
Page 23: ......
Page 24: ...BI Communications Innovation through Technology...
