BHOOP TAIYO 0500, User Manual, Page: 13 / 40

13
UK- Instructions for use
IMPORTANT– READ CAREFULLY AND KEEP FOR FUTURE REFE-
RENCE
CONTENT
A stroller frame
B Front wheels x2
C Seat frame
D Front bar x 1
E Arches for canopy x 2
F Muho car seat adapters
TAIYO STROLLER
OPENING THE FRAME
1 Disconnect the hook
holding the stroller closed.
1a Pull up the handle as indicated by the arrow: the stroller will be
opened completely when you hear a click.
MOUNTING THE WHEELS
2 The rear wheels are already mounted. Check the correct assembly and that
they are free to turn
Front wheel assembly: as shown in Fig.
2a insert the metal pin into the housings front and until you hear a click . The
wheels are hooked.
WARNING: before use, move and turn manually the wheels
to accept that they are all fixed correctly in their housings.
ASSEMBLY OF SEAT FRAME
3 Grasp the closed seat and insert the side guides in the side joints of the frame
until you hear a click on it when it is locked
ATTENTION: make sure that the seat is correctly hooked by
pulling it upwards
4 Grasp the handle on the back of the backrest and rotate upwards until it locks.
To ensure that the lock is successful, push the seat downwards.
The seat is hooked and ready to accommodate the cover sold separately.
(TAIYO style pack)
5 The front bar is removable. Press both keys under the bar to release it by pulling
it towards you
5a The front bar can be opened to facilitate positioning or removal of the child.
Press only one of the two keys (right or left) to release the bar from one side and
open it, letting it rotate to the sides of the frame.
ASSEMBLY OF TAIYO STYLE PACK (lining, canopy , padded belt covers , mattress
and basket)
REMOVAL OF THE HOOD FRAME
6 Remove the front hood bows by pressing the inside of the joints gently with a
small screwdriver until the bow is released and gently pulling upwards . Repeat
the operation on the opposite side and for the rear arch