Page 17
The selected noise cancellation level can be seen in the
small cutout on the switch knob.
Starting at level 0 switch the noise cancellation on, listen
to a typical noisy signal. Adjust the level of noise
cancellation to suit.
Note:
The higher levels of noise cancellation will remove
virtually all the background noise, but the user will note
the following possible effects if high levels of background
noise are present.
n
Voice has a slightly robotic sound.
n
Background noise becomes a watery sound.
Switching off the noise cancellation will restore the audio
to its original form.
If there is a lot of noise present on the audio signal it
may be necessary to increase the output volume (or line
level out) with the noise cancellation on.
Note:
Please note that if the volume is increased and the noise
cancellation (or power) is switched off the resulting
unprocessed signal will be at a higher level. Care must
be taken to avoid excessive signal levels, as they may
result in damage to hearing or equipment. bhi Ltd does
not accept responsibility for damage to equipment or
hearing however caused.
