Page 23
NEDSP1062-KBD Operating Manual
4.
Operation.
Start
Noise cancellation
On
Wait 1.5 Seconds
Noise cancellation of f
Highest
Lev el?
Normal operation
No
Yes
Increase DSP
noise cancellation
lev el
Start
Noise cancellation of f
Noise cancellation
On
Wait 3 Seconds
No
Y es
DSP button
pressed?
2 tone beep
Normal operation
Wait 3 Seconds
Demonstration 2.
The module switches
the noise cancellation
on for 3 seconds then
off for 3 seconds. This
is a good demonstra-
tion of the before and
after effects of remov-
ing the noise.
Demonstration 1.
The module switches the
noise cancellation on for 1.5
seconds, then off for 1.5
seconds. It will then move to
the next level and repeat the
process.
This mode is particularly
effective at demonstrating the
different DSP levels.
Alternatively pass a clean
audio signal through the
module to see hear how little
the DSP alters the speech.
Note:
To exit the demonstra-
tion modes hold down
the DSP button until a
2 tone beep is heard.
Figure 19.
Demonstration
modes.
4.3 Demonstration modes.
