Page 2
The bhi NEDSP1061 noise reduction module is a fully integral solution for noise
reduction on the Yaesu FT-817.
Features:
n
4 Levels of noise cancellation (up to 35dB)
n
Single Button operation
n
Visual and audible indication of operation
n
Low power consumption
n
Retains the internal battery pack
n
Fully integral installation
n
Stores the last used filter level.
n
Automatic tone reduction (upto 65dB)
Specifications:
White noise reduction:
level 1
11dB
Size:26 x 37mm
level 2
13dB
level 3
19dB
Voltage
5 -15VDC
level 4
35dB
Tone reduction:
level 1
5dB
level 2
8 dB
level 3
21dB
level 4
65dB
Current consumption:
45mA
The fitting of the bhi NEDSP1061 module involves the removal of small surface mount
components and the drilling out of the transceivers’ lid. This should only be carried out by
a qualified engineer. bhi accepts no responsibility for the fitting or installation of the
NEDSP1061 module and are not liable for any damage to equipment caused by its fitment.
All attempts have been made to ensure that this information is up to date. It is possible
that these instructions contain errors, or the equipment is slightly different to the one
used to compile this information. In all cases it is up to the installer to ensure that the
module is fitted correctly.
By installing this module you are doing so at your own risk.
2. Disclaimer
1. Introduction.
