BHI HydroRam HK580S, Operations Manual & Parts List

Page: 2 / 54

FOREWORD
We thank you very much for your purchasing of our BHI HydroRam Hydraulic hammer.
To obtain the best performance of your hammer under any working conditions, you need to
do proper handling, regular inspection and maintenance. Otherwise the hammer may fail to
display its full capacity or result in various troubles of the certain parts.
This Operation Manual and Parts List provide you with all the information you need to
correctly use for maintenance. Please read carefully this publications prior to the installation
and operation in order to prevent any possible mishandling of the hammer and minimize the
down time of the equipment. Any inquiry related to the maintenance and service through
your local dealer will be highly appreciated.
BHI dealers and service workshops are equipped with the necessary special tools and
well-dimensioned parts stocks where only genuine parts are used for service and repairs. We
guarantee that a faithful compliance of the instruction will contribute to the best operational
conditions. Customers are, therefore, required to keep in mind that the manufacturer is not
responsible for troubles caused by not following our instructions or not using the genuine
parts.
BHI reserves the right to make changes of the product without prior notice and without
assuming any responsibility to carry out the same change to products already sold or
manufactured.
Note! The descriptions in this book do not apply to any particular specification. Both
standard and optional equipment are covered, and each hammer is equipped and set in
accordance with each specific order. Consequently, standard and optional equipment are not
marked in the text of this book.
Best Hammer Industries
Technical Information