2
3
Inserting the Pins into the Plug:
Figure 8:
Diagram of Pin Insertion into Plug
5. Insert the wired pins into the back of the plug. Push the pins in
until they cannot be pushed in any further. The grounding pin
must be inserted into the center position of the plug. (To order
an insertion tool see page 24).
Connecting/Disconnecting the Plug and Receptacle:
6. Align the plug prongs with the receptacles. The plug and
receptacle should snap together easily. Do not force the
connection. If the plug does not easily connect to the receptacle,
check to ensure the flatten sides of the top and bottom prongs of
the plug match the receptacle’s.
7. To disconnect the plug from the receptacle, push down on the
levers located on the sides of the plug, and pull gently.
Troubleshooting
Before calling for assistance, please review this troubleshooting
guide. If,
after consulting the guide, you are still unable
to identify
the problem or if you need additional assistance then
please contact
BriskHeat
.
