35
G. Frequently Asked Questions.-
MAKING SURE SHUT OFF ELECTRICITY BEFORE YOU DOING IT.
If the supply cord id damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
G.1
The control panel does not work.
Problem Explanation Solution
1.
The power indicator isn’t on
The fuse is broken or the
sauna is not plugged in
Change the fuse or the plug
in the sauna
2.
The soft keys do not work
Unplug sauna, wait a minute or plug back into power source.
G.2
The light doesn’t work.
Problem Solution
1.
The bulb filament isburned out.
Change the bulb (
≤
15 watt)
G.3
The heater tube does not heat.
Warning: Only qualified person can replace or repair the heater.
Problems Explanation
Solution
The heater is defective
Replace with a new heater
1
Part of the heater
does warm up
Part of the heater is not connected
well or burned out
Connect them tightly
The relay is damaged
Replace the relay
The control panel isdamaged
Replace the control panel
2
The entire room
does not heat
The plug is not plugged in
correctly
Re-plug it
3 Bench
heater
does not heat
It is not connected tightly into the
Outlet on the back panel
Connected tightly No Duch
Construction used.
- Replacing the main fuse.-
- The location of the fuse holder is shown by the arrow on the top roof panel, Fig.18.
Fig.18
H. Maintenance.-
H.1
Clean the sauna room with a soft wet cloth. NEVER use petrol, alcohol, benzene or any other such
chemical to clean the unit.
H.2
In hospital or public use areas the sauna can be detoxified with ultrasonic equipment.