11
The display unit will show the below reading;
Body fat
Body Water
Kcal + Bone
In this time, you can press the SET key to hold and see it.
6) You can leave the platform of scale. You can press the Mode key to switch to the Clock mode. Or the
scale will automatically switch to the Clock mode after 20 seconds if no operating.
7) In the Analysis mode, you can press ATH/
▼
to enter the athlete mode, press again to cancel it.
3. Display messages of the scale
■
ClOCK
The unit is in the clock mode.
■
WT
The unit is in the Weight mode.
■
WT-fAT
The unit is in the Analysis mode.
■
OVERlOAD
If the maximum load of the scale of 150kg(330lb) has been exceeded, then the LCD will show
”O-Ld”.
Remark: Immediately unload the scale so that the sensors will not be damaged.
■
lOW BATTERIES
If the batteries of display unit are spent, the following icon “LO-1” will appear in the LCD.
If the batteries of main unit are spent, the following icon “LO-2” will appear in the LCD. Please imme-
diately replace the two batteries with 2 new ones of the same type.
■
fAUlTY MEASUREMENT
If an uncertainty has occurred during measurement, for instance due to movement during the mea-
suring process, then the following icon “Err” will appear on the LCD.
OpERATION INSTRUCTION AND GUARANTEE
INfRARED MUlTIfUNCTION BODY SCAlE