manualshive.com logo in svg

BH FITNESS T4, Owner'S Manual, Page: 9 / 29

Share
Download
BH FITNESS T4 Owner'S Manual Download Page 9

 
 

 

BH Fitness  •  20155 Ellipse  •  Foothill Ranch  •  CA  •  92610 

www.bhnorthamerica.com  •  Phone 949-206-8152  •  Fax 949-206-0013 

8

ASSEMBLY INSTRUCTIONS T4-T6 PRO CONTINUED 

 

 

 
4.

 

Connect the control wire harness 
pulled out from the upright tubes 
to the control wire harness on the 
computer rack assembly. 

 

5.

 

Then place the computer rack 
assembly (E) onto the left and 
right uprights. 

 

6.

 

Next attach the computer rack 
assembly to the uprights using 
the 4 (b) bolts. 

 
NOTE: When you fasten the bolts, please 

ensure that the wires are not 
pinched by the bolts when 
securing the upright and handrail 

 

 

 

 

7.

 

Next place bottle holder 
mounting cover (H) onto the 
computer rack assembly and 
fasten them with 1 bolt (d) on 
each side. 

 

8.

 

Snap the handrail covers (I, J) in 
place as shown and secure with 2 
(e) bolts on the cover sides and 1 
(c) bolt on the bottom. Repeat 
this step for the other side. 

 

E 

Summary of Contents for T4






























Reviews:

No comments