background image

 

 

 

T11 Treadmill  

BH Fitness  •  20155 Ellipse  •  Foothill Ranch  •  CA  •  92610 

www.bhfitness.com  •  Phone 949-206-0330  •  Fax 949-206-0013 

25 

WARRANTY 

 

PARTS

 – 10 Years (Home Warranty) / 5 Years (Institutional Warranty) / 3 Years – (Light/Full 

Commercial Warranty) 
BH Fitness warrants all original parts against defects in workmanship and materials for a period of ten 
years from the date of original purchase, so long as the unit remains in the possession of the original 
owner for home use. 
BH Fitness warrants all original parts against defects in workmanship and materials for a period of five 
years from the date of original purchase, so long as the unit remains in the possession of the original 
owner for Institutional use. 
BH Fitness warrants all original parts against defects in workmanship and materials for a period of three 
years from the date of original purchase, so long as the unit remains in the possession of the original 
owner for full commercial use. 

 

LABOR

 – 2 Years – (Home Warranty) / 1 Year – (Institutional and Light/Full Commercial Warranty) 

BH Fitness shall cover the labor cost for the repair of the unit for a period of two years from the date of 
original purchase, so long as the unit remains in the possession of the original owner for home use. 
Labor warranty does not include the travel time and or expense that may result from the unit being 
outside of the seller or repair technician’s normal service zone. 
BH Fitness shall cover the labor cost for the repair of the unit for a period of one year from the date of 
original purchase, so long as the unit remains in the possession of the original owner for Institutional 
and commercial use. Labor warranty does not include the travel time and or expense that may result 
from the unit being outside of the seller or repair technician’s normal service zone.

 

 
EXCLUSIVE REMEDY 

The exclusive remedy for any of the above warranties shall be repair or replacement of defective parts, 
or the supply of labor to cure any defect, provided that labor shall be limited as detailed above. All labor 
shall be supplied by the local retailer and the product must be located within the retailer’s service area. 
Labor warranty does not include the travel time and or expense that may result from the unit being 
outside of the seller or repair technician’s normal service zone.

 

 
EXCLUSIONS AND LIMITATIONS 

This warranty applies only to the original owner and is not transferable. This warranty is expressly 
limited to the repair or replacement of a defective Frame or defective part and is the sole remedy of the 
warranty. The warranty does not cover normal wear and tear. 

 

BH FITNESS

 expressly disclaims all other warranties, express or implied, including but not limited to all 

warranties of fitness for a particular purpose or of merchantability. This warranty gives you specific legal 
rights and your rights may vary from state to state. 

 
WARRANTY REGISTRATION 

Your warranty card must be completed and sent to BH FITNESS before a warranty claim can be 
processed.

 

Summary of Contents for T11 - V2



























Reviews: