ASSEMBLY INSTRUCTIONS (cont’d)
RS5 RECUMBENT CYCLE
ATTENTION:
TAKE CARE NOT TO PINCH THE
THE CABLES DURING THE ASSEMBLY
PROCESS.
A1
A2
N1
N2
N3
A3
A4
A1
FIGURE_4 CENTER SUPPORT ASSEMBLY
I
D
N7
N2
N3
A34
A33
A4
A36
Step1. Connect hand pulse sensor wire (A3) to (A4).
Step2. Slide the front(A1) and rear(A2) main frames
onto each other and secure the joint with 6 screws (N1)
6 washers (N2) and 6 washers (N3)
Make sure not to pinch the cables
Step1. Slide the tube cover(I) onto the
.
main support tube(D)
Step2. Connect hand pulse sensor cable(A33) coming
from main support tube to cable(A36) from the main frame
Connect power cable(A34) coming from main support
tube(D) to cable(A4) of the main frame
Step3. Secure main support tube to main frame(A1) using 3 bolts(N7)
washer(N2) and 3 washer(N3).
and 3 spring
Slide main support tube cover down until it covers the joint completely
C1
FIGURE 3: FRONT & REAR MAIN FRAME ASSEMBLY
9
BH Fitness • 20155 Ellipse • Foothill Ranch • CA • 92610
www.
%+)LWQHVV86$
.com • Phone 949-206-0330 • Fax 949-206-0013
RS5
