BH FITNESS R309U, Instructions For Assembly And Use

Page: 11 / 38

11
6.- MOUNTING THE REAR
SUPPORT.-
Position rear support (3) on the bottom
of rail (2), Fig.3.
Insert screws (38)
and washers (39) and then firmly
tighten with the 6mm Allen
wrench.
7.- MOUNTING THE
ELECTRONIC CONSOLE.-
Hold the stem (31) and connect the
feedback cable terminals Fig.5.
Insert the stem (31) onto the boss on
the main body (1) in the direction of
the arrow, making sure not to catch
any of the cables. Next, line up the
stem with the holes and fit the Allen
screws (50), tighten securely.
Take the monitor (32), remove the four
screws (7) from the base, Fig.5,
connect the terminal, position the
monitor on the stem, making sure not
to catch any of the cables, and attach
it using the four screws (7) removed
previously.
LEVELLING.-
Once the unit has been placed into its
final position for doing exercise, make
sure that it sits flat on the floor and
that it is level. This can be achieved by
screwing the adjustable support
blocks (24) up or down, as shown in
Fig.6.
MOVEMENT & STORAGE.-
The unit is equipped with wheels (14)
to make it easier to move. The wheels
located at the front of your unit make it
easier to move it into a chosen
position, by lifting the rear of the unit
up slightly and pushing it, as shown in
Fig.4. Store your unit in a dry place,
preferably not subject to changes in
temperature.
MAINS CONNECTION.-
Insert the jack (m) for the transformer
into the connection hole on the main
body (k) (bottom, rear of the machine)
and then plug the transformer (6) into
a 230 V mains supply, Fig.6.
Do not hesitate to get touch with the
Technical Assistance Service if you
have any queries by phoning customer
services (see last page in manual)
BH RESERVES THE RIGHT TO
MODIFY THE SPECIFICATIONS OF
ITS PRODUCTS WITHOUT PRIOR
NOTICE