11
4.- FITTING THE HANDLEBAR
Position the bracket (60) in its bracket
(55). Position the handlebar (21) in its
bracket (55) and the handlebar stem
(37), Fig 5, tighten the knob (
) and
then insert the handlebar stem (37)
into the hole on the main body (A), Fig
5. Position it correctly and then tighten
knob (Y) by turning it clockwise.
ADJUSTING THE HANDLEBAR
HORIZONTALLY
Position the handlebar (21) at a
comfortable
distance
for
doing
exercise, now tighten knob (
)
securely, Fig 5.
Stay within the references.
ADJUSTING THE HANDLEBAR
VERTICALLY
Position the handlebar (21) at a
comfortable
distance
for
doing
exercise, now tighten knob (Y)
securely, Fig 5.
Stay within the references without
going beyond the “MIN INSERT”
mark.
5.- ATTACHING THE MONITOR.-
Fit the monitor (61), Fig.5, into the
bracket (60) and insert the jack on the
middle cable (90) into the back of the
monitor.
EXERTION SETTINGS
To provide an even level of exertion
during exercise, this appliance is
equipped with a tensioning control (31),
located on the stem of the main body
(A), Fig 6. This provides various exertion
settings when turned clockwise.
To increase pedal resistance turn the
tensioning control (31) clockwise (+)
until the exertion level best suits your
exercise requirements.
To reduce pedal resistance turn the
tensioning control (31) anticlockwise (-).
During exercise the flywheel will get
hot due to the braking effect, so when
you have finished exercising it is
advisable to set the tensioning control
(31) to minimum in order to help stop
the brake shoe from hardening.
Important:
This tensioning control
(31) is equipped with an emergency
braking system which, when applied
with force (as shown by the arrow in
Fig 6), produces a much sharper
braking effect.
LEVELLING.
Once the unit has been placed into its
final position, make sure that it sits flat
on the floor and that it is level. This
can be achieved by screwing the
adjustable feet (13) up or down, as
shown in Figure 6.
MOVEMENT & STORAGE
The unit is equipped with wheels (15)
Fig 6, to make it easier to move. The
wheels located at the front of your unit
make it easier to move it into a chosen
position, by lifting the rear of the unit
up slightly and pushing it, as shown in
Figure 7. Store your unit in a dry
place, preferably not subject to
changes in temperature.
Do not hesitate to get touch with the
Technical Assistance Service if you
have any queries by phoning customer
services (see last page in manual)
THE MANUFACTURER RESERVES
THE RIGHT TO MODIFY THE
SPECIFICATIONS OF ITS PRODUCTS
WITHOUT PRIOR NOTICE.
Summary of Contents for H9175T5
Page 2: ...Fig 1 Fig 2 Fig 3 ...
Page 3: ...Fig 4 Fig 5 ...
Page 4: ...Fig 6 Fig 7 ...
Page 32: ...32 H9175T ...
