16
Plug the unit into a wall socket with an
EARTH terminal. Set switch (L) to
Position [1].
Fig.B
ASSEMBLY INSTRUCTIONS.-
The assistance of a second person
is advisable for the assembly work.
Take the unit out of the box and place
it on the floor as shown in Fig.0.
Make sure that all of the pieces are
there: (2) Main structure; (4) side bar
(left); (5) Side bar (right); (25) Allen
screw M8x15; (17) Self-tapping screw
6x25; (1a) Monitor; (1b) Side bar
base; (93) Safety key;
Allen key 5mm;
Allen key 6mm; (115) Bottle of
lubricant.
Follow the instructions step by step to
assemble:
1
First of all take the right side bar (5)
connect terminals (77) (78) Fig.1, then
insert the side bar (5) into the bottom
right-hand support on the structure
and use screws (25).
2
Now take the left side bar (4) and
insert it into the bottom left-hand
support on the structure and use
screws (25) to secure it.
3
At least two people are needed for this
step. When fitting the side bars, one
person should hold the side bar while
the other one fits the screws (25). This
will prevent any possible accidents.
FITTING THE MONITOR:
4
Connect the control cable terminal (B)
Fig.3, coming out of the monitor, to the
control cable , sticking up from the hand
side bar (1b), and insert screws (17),
making sure not to pinch the cables,
and screw in until hand tight.
5
Connect the control cable terminal (B)
Fig.3, coming out of the monitor, to the
control cable (77), sticking up from the
hand side bar (5), and insert screws
(25), making sure not to pinch the
cables, and screw in until hand tight.
Note:
Make sure that the cables do
not become caught up when the unit is
folded. Tighten the 4 screws (25) fully.
FOLDING YOUR UNIT.-
This treadmill is equipped with a
folding
mechanism
for
storage
purposes. To use it, stop the treadmill,
lower the elevation level to minimum,
unplug the mains cable and lift the unit
until you hear lever (49) click into
place, Fig.5. Store your unit in a dry
place, preferably not subject to
changes in temperature.
UNFOLDING YOUR UNIT.-
If you wish to use the treadmill, do the
reverse procedure. Use your to press
lever (49) in the direction of the arrow
as shown in Fig.5 and slowly lower the
treadmill belt down to the floor. When
folding or unfolding the treadmill make
sure that there are no children about
or obstacles that might hinder the
folding motion.
Summary of Contents for G6496FB
Page 2: ...2 Fig 0 Fig 1 ...
Page 3: ...3 Fig 3 Fig 4 Fig 5 Fig 6 ...
Page 4: ...4 Fig 7 Fig 8 ...
Page 65: ...G6496FB ...
