background image

EN

47

EASYGO / EVO / NITRO / AWD                           USER MANUAL

4. 

The bicycle has not been repaired in accordance with the instructions in the maintenance manual.

5. 

The bicycle has been repaired or maintenance has been carried out on it by a dealer that 
is not authorised by BH.

6. 

Non-original parts have been installed on the bicycle.

7. 

The original owner has transferred the bicycle to a third party.

Liability

• 

BH assumes no liability for damage to (parts of) the bicycle caused by the incorrect fitting of the bicycle's moving 

parts, unsuitable use and/or maintenance of the bicycle (including the late replacement of wearing parts).

• 

If BH accepts a warranty claim, this in no way implies acceptance of liability for any damages incurred.
In the event of a dispute over (subsequent) damages suffered, BH disclaims all liability in that regard, 
as it is not legally bound to compensate them.

NOTE

Any unauthorised handling of the electrical system's components may 
be dangerous and will be grounds for invalidating the warranty.

 
 

CLEANING, MAINTENANCE AND STORAGE

ATTENTION

Do not use high-pressure washers or jet stream cleaners, as they may cause 
water ingress, damaging the system, the motor, the display panel or the battery. 
If water enters one of these units, ask an authorised dealer to check your bicycle.

Battery Care

Keep the battery clean. Use a damp and properly wrung out cloth to clean dirt from the battery case. Do not pour 
water directly onto the battery, e.g. with a hose.

ATTENTION

Do not clean the contacts by polishing them with a file or using a wire, etc. 

Otherwise, it may cause failures.

Motor Maintenance

Because the motor is a precision machine, do not disassemble it or exert excessive force on it (e.g. do NOT hit 
this product with a hammer).

Storage

Keep the bicycle in a place that is:

• 

Flat and stable 

• 

Well ventilated and dry

• 

Protected from the elements and direct sunlight

20

Summary of Contents for AWD


























Reviews: