BGU SM 300, Original Instruction Manual

Page: 15 / 32

15
7. SPLITTING WEDGE AND
CLEAVING WEDGE
Fig. 7
Abb. 6
8
9
On request , the log splitter can be factory equipped with a 4-ways
wedge (Pos. 8, Fig. 6) and/or a splay wedge (Pos. 9, Fig. 7).
The 4-ways wedge (8) is designed for splitting each log in 4 sticks in
one cycle.
The splay wedge (9) can be used for cleaving big, hardwood logs and
facilitates breaking through the log.
4-ways wedge and splay wedge are simply slipped on the permanent
wedge and secured by tightening of the star knob screw.
BEFORE STARTING THE CYCLE make sure that the 4-ways/
cleaving wedge or extension wedge is fully slipped-on the per-
manent wedge and secured in position!
BEFORE STARTING THE CYCLE make sure that wedge is fully slipped-
on the permanent wedge and secured in position with the blade wings
facing the operator side (Fig. 7). Do not work with a loosened wedge
to avoid falling off during splitting! This is a very UNSAFE method and
could result in major injuries to the operator and permanent machine
damages.
Preferably refrain from using a 4-ways wedge on hard, heavy woods
(for example flowering trees and beech wood) that are going to op-
pose a stronger resistance to the wedge causing the relief valve to
actuate the hydraulic system leading to a more likely jamming of the
wood.
This accessory is not included in the price of the standard machine.