BGU SM 300, Original Instruction Manual, Page: 14 / 32

14
Before handling, moving or transporting the splitter make sure to cut the
power off (unplug the machine). This machine is conceived for very er-
gonomic easy handling thanks to the special wheel arrangement in the
rear bottom part of the machine (fi g. 5).
Dismount the extension table (6) Fig. 5. 2. To do this, fasten the hand-
le (7) with one hand, pull the splitter up and start hauling it away on its
back wheels.
For space-saving during storage and transportation the ram must be ful-
ly retracted over the carriage.
To retract the cylinder in trasport asset, fi rst release both hex nuts
(SW 19) of the fl ange and then shift the ram all the way to the edge
on the opposite side of the splitter.
To set the splitter ready to work again, make sure to screw and secure
the cylinder back to the casing (see 5.1 “Splitter setup”).
6.
HANDLING AND TRANSPORTATION
Fig. 5
7
(6)