16
Lubricate the drive chain every 40 operation hours.
Use grease suitable for high temperature (it should not melt as common low-price lithium grease) in order
to prevent grease contamination of the sliding clutch surfaces. Accurately clean the chain before greasing.
Make sure to avoid contamination of the clutch lining with grease as this may
lead to a significat loss of the pull force and to early wear of the clutch plates that
will then need to be replaced!
The winch is equipped with self-lubricating bearings that require no further lubrication or maintenance.
Provide PTO shaft lubrication in accordance with the instructions of the manufacturer (Fig. 10).
5.8 Checking the hydraulic oil level
Make sure to check the oil temperature every once in while during operation. Should the
temperature exceed 70°C, stop working, disconnect power, search and
fix the cause for overheating before continuing to work. DANGER: ex-
cess heat over a prolonged period of time may lead to even permanent
damages of the hydraulic circuit
40 h 8 h 40 h 16 h 40 h 8 h 40 h
Summary of Contents for FSW 5.5 H Evolution
Page 27: ...27 14 FSW 5 5 H EXPLODED VIEW...
