BGS technic BGS 8639, Instruction Manual

Page: 5 / 16

BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
DISPLAY
A Start laser
B Measurement basis
C Minimum value
D Area / Volume
E Maximum value
F Pythagorean theorem, indirect measurement
G Storage data
H Main display area
I Battery
J Measurement unit
KEY
1 Start measurement
2 Selection basis side
3 Addition measurement
4 Shutdown / Clear
5 Backlight ON/OFF / Unit selection
6 Selection area, volume, Pythagorean theorem
7 Subtraction measurement
BASIC SETUP
1. Press button “ MEAS “(1) to start the instrument and laser. The instrument enters under test mode.
2. The instrument will shut down 2 minutes later automatically in case of no operation.
3. Press button “ CLEAR “(4) to clear the measured data. Long press to shut down the instrument.
4. Press button “ UNIT ”(5) to set the background light on/off. Long press to enter unit switching.
5. Press button (2) to enter the selection of measuring basis side. The default basis side of the
instrument is the bottom side.
MEASUREMENT
• Press button “
MEAS
“(1) to start laser; press the key again for single measurement.
• The measuring results will be displayed on the main measuring display area.
•
Press button “ MEAS “(1) for long time to enter the continuous measurement model, in which the
measured maximum and minimum value will be displayed on the screen.
•
Press button “ MEAS “(1) for short time to exit the continuous measurement mode.
Note: During the area, volume and Pythagorean proposition measurement, the use of continuous
measurement will be beneficial for users to accurately positioning the largest and shortest side.