BGS technic 9445, Instruction Manual

Page: 6 / 6

BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
9. Rotate the tool counter-clockwise 3-round
to place the adapter that you want to
operate and rotate clockwise until it stops.
10. Squeeze the lever and continue until the
edge of the adapter meets the die.
11. Open the relief valve 1/2-round, than close
tightly.
12. Grasp the handle and rotate the tool
counter-clockwise to remove the adapter
from the die.
13. Then loosen the tightening bar and remove the tube. It should look something like the sketch
below.
Finish position
CONNECT
Relief valve
GM
GM-TC 45° & DOUBLE
ISO