SW-Stahl und Werkzeugvertriebs GmbH
Tel. +49 (0) 2191 / 46438-0
F
5
6
e
s
s
a
r
t
S
r
e
s
u
k
r
e
v
e
L
ax +49 (0) 2191 / 46438-40
e
d
.l
h
a
t
s
w
s
@
o
f
n
i
:l
i
a
M
-
E
d
i
e
h
c
s
m
e
R
7
9
8
2
4
-
D
Instruction Manual
BGS technic KG
Bandwirkerstr. 3
42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
IMPORTANT SAFETY INFORMATION
WARNING!
Read and understand and follow all instructions and warnings before operating this tool.
Failure to do so may result in personal injury and/or property damage and will void warranty.
Oil tool before each use. 4 to 5 drops of a good grade Air Tool Oil placed in
the
air inlet is sufficient.
Use proper air pressure and CFM rating listed for this tool.
1.
The power tool shall not be used in potentially explosive atmospheres.
2. Unexpected tool movement due to reaction forces or breakage of inserted tool or reaction bar may
cause injuries.
3. Disconnect the air hose before changing or adjusting any inserted tools.
4. Prevent long hair or loose clothing from drawing in while operate this tool.
5. Keep your body in well balanced position and always wear gloves to reduce the risk of crushing
caused by torque between a reaction bar and workpiece.
6. Unexpected direction of inserted tool movement could cause a hazardous situation.
7. Slip/Trip/Fall is a major reason of serious injury. Beware of excess hose left on the walking or
work surface and the whipping air hose.
8. Wearing eye/face protector could reduce the danger to person from high speed splinters being
emitted from this tool in the case of inserted tool failure or emitted from the workpiece.
9. Wearing mouth-muff could avoid inhaling dust or handling debris from work process that can be
harmful to your health.
10. Excessive high air pressure and to much free rotation may speed the wear of this tool and might
cause danger situation.
11. After working always disconnect the air hose.
ON-OFF DEVICE
The on-off device is of trigger type which is on the contour of the grip. It is a "hold-to-run" type. This
tool stops rotation within few seconds, after releasing the trigger. For the sake of safety, place it on a
level plate or on hanger after it completely stops
1
Quick Action Chuck
2
Reversing switch for clockwise /
counterclockwise
3
Trigger
4
Compressed air connection
5
Silencers for air exiting
1
2
3
4
5
