Art. 8558
MULTI-USE TRANSFER PUMP
PARTS
Intake
Small Hose
Air Hose
Transfer Hose (2x)
Discharge
Needle / Nozzle
Hose Connector (A)
Hose Connector (B)
SAFETY ADVICE
This tool is only suitable for water or air. Do not use this tool for pumping fuel, oil, or any flammable liquids!
FOR USING AS AN AIR PUMP
1. Place the air hose into the pump discharge connector.
2. To inflate pool toys, beach balls, etc., insert the ball needle or nozzle adaptor into the thumb lock located
on the end of the air hose. Both ball needle and nozzle adaptor are all included
3. Deflation and compact storage can be achieved by using pump to extract air after use. Connect the hose to
pump "intake".
FOR USE AS A SIPHON
1. Insert one red hose into the (intake) nozzle & the other into the (discharge) nozzle.
2. Slide the hose connectors (A) over hoses and slide towards the intake/discharge nozzles.
3. Press the connector firmly over the nozzles until the hoses are securely inserted.
4. Place the red hose coming from the (intake) nozzle into the liquid to be transferred.
5. Place the red hose coming from the (discharge) nozzle to where the liquides to go.
6. Prime the unit by pumping the handle 3 or 4 times.
7. Once the liquid begins to flow, it will flow without further pumping.
NOTE
: For proper siphoning, the discharge hose must be lower than the intake hose.
FOR USE AS A WATER PUMP WITH SMALL HOSE
1. Follow steps 1 to 3 above.
2. Insert the small hose into the hose adapter (B) and insert into red (intake) hose
3. Insert the other end of the tube into the liquid to be transferred.
4. Keep feeding hose down until it reaches the bottom of the liquid container.
5. Place the red hose from the (discharge) nozzle into a collection container then start pumping.
