BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 32801
Combination Air Nailer, 50 mm
TECHNICAL DATA
Fasteners brads: 10 - 50 mm
Staples:
16
- 40 mm
Magazine capacity: max. 100 piece
Operating pressure: 4 -
8
Bar (58 - 116 PSI)
Air inlet: 1/4"
Hose diameter: 10 mm (3/8“) recommended
Sound pressure level (LpA):
84.7
dB(A)
Sound power level (LwA):
97.7
dB(A)
Vibration level: ahd= 11.
37
m/s² / K= 1.5 m/s²
Weight: 1.
36
kg
Lubricant: Air tool oil
SAFETY INSTRUCTIONS
WARNING
Read Manual to reduce the
risk of injury.
WEAR HEARING PROTECTION.
Noise can cause hearing loss.
WEAR SAFETY GOGGLES.
During the work spark,
splinters can fly around chips
and dust can cause loss of
vision.
Do not use on ladders.
Always pay attention to good
standing.
SAFETY INSTRUCTIONS
•
Keep children away. All children should be kept away from the work are. Don't let them handle the
tool.
•
Use safety glasses and ear protection: the tool operator and all persons in the work area must
permanently operate to prevent some foreign mattes strafe into eyes. Maybe the noise would
harm your hearing, wear the ear protection to safeguard.
•
Never wear loose clothing or jewelry as they can be caught in moving parts.
•
Never use oxygen, combustible or any other bottle gas as a power source or would cause
explosion and serious personal injury.
•
Only connect tool to air supply with a coupling that will release all pressure from the tool when
disconnected.
•
Disconnect tool from air supply before finishing operation or performing maintenance.
•
Do not aim the tool at anyone in case of danger while our are operating it and do not remain any
fasteners in the channel when you finish your work.
•
Do not soak tool with cleaning solution. Such solutions can damage internal parts.
•
Do not place your hand or any part of your body in the fastener discharge of the tool when
connecting or disconnecting air supply.
