BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
RECOMMENDED AIR SUPPLY
No.
Description
No.
Description
1
Air Tool
6
De-Watering / Filter Unit
2
Air Hose
7
De-Watering Valve
3
Quick Coupler
8
Shut-Off Valve
4
Oiler (only required for air tools with motor)
9
Dryer / Filter Unit
5
Pressure Regulator
10
Compressor / 11 De-Watering
Valve
SERVICE
•
Only operate the product on compressed air systems that have the correct air pressure and
sufficient air volume (L / min) for this tool.
•
Before using the compressed air device, put 4 to 5 drops of compressed air device oil into the
compressed air connection. The performance of the device depends on the size of the air
compressor and the compressed air supply volume.
•
The speed can be set via an air supply controller (not included in the scope of delivery).
•
The technical data of the tool refer to a working pressure of 6.3 bar.
•
Always be careful when using the Air Body Saw. In case of negligent operation, internal
components of the device can be damaged and the work performance can be restricted.
•
Press the actuation lever (trigger) to operate the tool.
•
Release the operating lever to stop the tool.
•
Do not remove any information labels from the device and replace damaged labels.
•
Keep hands, loose clothing and long hair away from the moving part of the tool.
APPLICATION
Note: Take the time to carefully select a work area.
Let the tool work independently without exerting extreme pressure! Excessive pressure reduces the
speed of the saw and thus the cutting performance. Furthermore, the engine is subjected to an
unnecessarily high load. Start the tool in front of the workpiece, then place it evenly on the workpiece
and move it in the desired direction to make the cut. After the cut, detach the tool from the workpiece
and then stop the motor.
