SW-Stahl und Werkzeugvertriebs GmbH
Tel. +49 (0) 2191 / 46438-0
F
5
6
e
s
s
a
r
t
S
r
e
s
u
k
r
e
v
e
L
ax +49 (0) 2191 / 46438-40
e
d
.l
h
a
t
s
w
s
@
o
f
n
i
:l
i
a
M
-
E
d
i
e
h
c
s
m
e
R
7
9
8
2
4
-
D
Instruction Manual
BGS technic KG
Bandwirkerstr. 3
42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
ASSEMBLY / PARTS
1
BUSHING
2
VENTILATION ROD
3
MAIN BOOM
4
ANGLE-ADJUSTMENT
5
LOCKING SCREW
6
DISTANCE-ADJUSTMENT
7
PRESSURE ELEMENT
8
TENSION SCREW
INSTRUCTIONS
1. Remove the spark plug.
2. Push suitable bushing (
1
) in the spark plug hole.
3. Attached the ventilation rod (
2
) through the bushing (
1
) in the spark plug thread.
4. Mount the main boom (
3
) to the ventilation rod (
2
).
5. Pressure screw and valve stem must have the same angle. The angle can be adjusted with the
angle-adjustment (
4
).
6. Set the distance adjustment so that the pressure screw and valve stem be in alignment.
7. Align pressure spindle and valve stem, fix the tool with the locking screw (
5
).
8. Rotate the engine until the cylinder is in TDC position. Secure engine against rotation.
9. Fill the cylinder over the pressure port with compressed air.
10. Mount the pressure element (
7
) on the valve and turn the tension screw (
8
) clockwise until the
valve spring is tension. The valve-securing wedges can be removed.
1
2
5
3
4
8
6
7
